LED-Tile D50

LED-Module

Description

LED-Tile D50

Die LED-Kacheln der Produktreihe D sind die ideale LED-Lichtquelle für alle Anwendungen bei denen die Körperfarben mit ausgezeichneter Lichtqualität bespielt werden sollen oder bei denen Weißtöne mit höheren Intensitäten als bei RGB-Kacheln erforderlich sind.

Der Grund: Die Serie D kombiniert hochwertige, effiziente RGB-LEDs und warmweiße 2000K-LEDs. Die Kombination der beiden LEDs ermöglicht bei weißem Licht eine Beleuchtungsqualität (Ra>90), wie sie alleine mit aus RGB-LEDs gemischten weißem Licht nicht realisierbar wäre (Ra<40). Zudem ergänzt das zusätzliche Weiß das Spektrum der RGB LEDs erheblich.

The D-Series LED tiles are easily driven by video sources. An internal color processor handles the pixel-accurate conversion from RGB to RGBW, taking into account the spectrometrically measured color and brightness data of each individual LED. The white LED is thus automatically calculated for optimal color reproduction but can also be controlled separately via a fourth channel.

Modern, high-quality electronic components—such as efficient synchronous switching regulators, balanced buses, and numerous protection and interference-suppression components—ensure easy and reliable commissioning, low energy consumption, and a long service life. This LED tile is developed and manufactured in Germany by qualified personnel using the company's own high-quality manufacturing equipment.

Product information

PropertiesLED-Tile D50
ApplicationSurface
Optical properties
Color / Color temperatureRGBW
Number of possible colors281474976710655
Number of pixels116
Pixelpitch50 mm
Luminous flux per module327 lm
Luminous flux red73 lm
Luminous flux green125 lm
Luminous flux blue28 lm
Luminous intensity per pixel6.3 cd
Luminous intensity per square meter2520 cd/m²
Luminous intensity per module101 cd
Beam angle115 °
Backlit surface – length200
Backlit surface – width200
Advanced Color EngineYes ✓
Support of different colorsystemsYes ✓
Individually spectrometrically calibrated LEDsYes ✓
Adjustable whitepointYes ✓
Adjustable primary colorsYes ✓
Optical properties: dimming
Flicker-freeYes ✓
Internal resolution65535 Steps (16 Bit)
External resolution65535 Steps (16 Bit) or 255 Steps (8 Bit)
Customizable dimming curveYes ✓
Schnick-Schnack-Systems dimming curve (type: C)Yes ✓
Schnick-Schnack-Systems dimming curve (type: B)Yes ✓
sRGB dimming curveYes ✓
power-linear dimming curveYes ✓
Gamma dimming curve with adjustable gammaYes ✓
Logarithmic dimming curve according to IEC62386Yes ✓
Global intensity supportYes ✓
Intensity calibratedYes ✓
Intensity boost optionYes ✓
electrical properties
Input voltage (VDC)24
maximum power per module9.6 W
Maximum power consumption per square meter240 W/m²
Input switching regulatorYes ✓
Synchronous switching regulatorNo
Protection against supply voltage on datalinesYes ✓
Control properties
DMXYes ✓
DPBYes ✓
ArtNet™Yes ✓
sACNYes ✓
DVIYes ✓
HDMIYes ✓
KNXYes ✓
Bidirectional communicationYes ✓
Adaptable transmission speed for DPBYes ✓
Number of channels 8bit (16bit)64 (128)
Internal color conversion RGB to RGBWYes ✓
Smart Link addressingYes ✓
Remote Firmware UpdatesYes ✓
Global Standby SupportYes ✓
Global Intensity SupportYes ✓
Global Color SupportYes ✓
Global Sync SupportYes ✓
60+ fps supportYes ✓
mechanical properties
Length166 mm
Width160 mm
Height10 mm
Weight per module110 g
Installation
Maximum number of modules on a 3A chain7
Way of mountingPCB-holder
Connections4-pin system connector, red (input and output)
Environmental properties
Operating temperature range-20 - 45
Relative humidity (permissible)10% – 90% (non-condensing)
Indoor / OutdoorIndoor
Degree of protection (IP rating)IP00
ConformityCE
General
Item number116.5026