The LED-Dot P is an efficient RGBW LED point with outstanding optical properties while maintaining a small installation size.
Higher power LEDs are required for special applications such as illuminating acrylic rods, creating hard shadows, and much more.
| Properties | LED-Dot P 6500K |
|---|---|
| Application | Dot |
| Optical properties | |
| Color / Color temperature | RGBW |
| Number of possible colors | 281474976710655 |
| Number of pixels | 1 |
| Luminous flux per module | 190 lm |
| Luminous flux red | 30 lm |
| Luminous flux green | 215 lm |
| Luminous flux blue | 22 lm |
| Luminous intensity per pixel | 62 cd |
| Luminous intensity per module | 62 cd |
| Beam angle | 120 ° |
| Advanced Color Engine | Yes ✓ |
| Support of different colorsystems | Yes ✓ |
| Individually spectrometrically calibrated LEDs | Yes ✓ |
| Adjustable whitepoint | Yes ✓ |
| Adjustable primary colors | Yes ✓ |
| Optical properties: dimming | |
| Flicker-free | Yes ✓ |
| Internal resolution | 262143 Steps (18Bit) |
| External resolution | 65535 Steps (16 Bit) or 255 Steps (8 Bit) |
| Customizable dimming curve | Yes ✓ |
| Schnick-Schnack-Systems dimming curve (type: C) | Yes ✓ |
| Schnick-Schnack-Systems dimming curve (type: B) | Yes ✓ |
| sRGB dimming curve | Yes ✓ |
| power-linear dimming curve | Yes ✓ |
| Gamma dimming curve with adjustable gamma | Yes ✓ |
| Logarithmic dimming curve according to IEC62386 | Yes ✓ |
| Global intensity support | Yes ✓ |
| Intensity calibrated | Yes ✓ |
| Intensity boost option | Yes ✓ |
| electrical properties | |
| Input voltage (VDC) | 24 |
| maximum power per module | 6 W |
| Typical power consumption per module at 6500K white | 6 W |
| Input switching regulator | Yes ✓ |
| Synchronous switching regulator | Yes ✓ |
| Protection against supply voltage on datalines | Yes ✓ |
| Control properties | |
| DMX | Yes ✓ |
| DPB | Yes ✓ |
| ArtNet™ | Yes ✓ |
| sACN | Yes ✓ |
| DVI | Yes ✓ |
| HDMI | Yes ✓ |
| KNX | Yes ✓ |
| Bidirectional communication | Yes ✓ |
| Adaptable transmission speed for DPB | Yes ✓ |
| Number of channels 8bit (16bit) | 4 (8) |
| Internal color conversion RGB to RGBW | Yes ✓ |
| Smart Link addressing | Yes ✓ |
| Remote Firmware Updates | Yes ✓ |
| Global Standby Support | Yes ✓ |
| Global Intensity Support | Yes ✓ |
| Global Color Support | Yes ✓ |
| Global Sync Support | Yes ✓ |
| 60+ fps support | Yes ✓ |
| mechanical properties | |
| Height | 36 mm |
| Diameter | 45 mm |
| Weight per module | 89 g |
| Installation | |
| Maximum number of modules on a 3A chain | 12 |
| Way of mounting | Two M3 thread-forming screws (DIN 7500) on the rear, or side screws with slide-in nuts (M3). |
| Connections | 4-pin system connector, red (input and output) |
| Environmental properties | |
| Operating temperature range | 5 - 45 |
| Relative humidity (permissible) | 10% – 90% (non-condensing) |
| Indoor / Outdoor | Indoor |
| Degree of protection (IP rating) | IP00 |
| Conformity | CE |
| General | |
| Item number | 120.0004 |